The connector has the same functions as a regular Heat Shrink connector, but has a wider diameter, making room for both the boundary cable and the guide cable.

It will protect the cable for many decades and leave it 100% oxidation-free, and is highly recommended for professional installations, and repairs.

If you don't own a heat blower or if you would like to have a portable heat-shrinking tool, then you can buy it here.

[embed]https://www.youtube.com/watch?v=i6lm0QkZwV4[/embed]

The post Guide Cable Heat Shrink connector appeared first on AM-Robots.

It is self-adhesive, making it easy to wrap and seal the tape around the cable to create a long-lasting connection.

Temperature resilience: -20 °C  -  +80 °C

• Self-adhesive
• Easy to install
• Long-lasting solution
• It can be used on all cable types

The post Repair Tape Extreme – 10m appeared first on AM-Robots.

We recommend using the heat shrink tube around the connector for an even stronger connection.

Crimp the connector before heating it to seal it and create a safe installation.

The post Crimping Connector appeared first on AM-Robots.

The Robot ReDirect is used to isolate an area within the boundary of the robot installation.

The Robot ReDirect is very easy to use, just twist the head, and the robot will be redirected. Twist the head back and you will include the entire garden again.

Offer your clients a customized robot installation which can be personalized to their garden and which meets the needs of their everyday life.

Give your customer a unique experience, so they don’t have to worry about the robot cutting the children’s toys or getting stuck on fallen fruit.

Robot ReDirect is used for:

• Play areas
• Fruit and nut trees
• Avoiding areas effected by rain water
• Seasonal flower beds
• Trampoline
• Outdoor party areas
• Grill and barbeque

A standard customer needs on average 2 Robot ReDirects per garden, so there is a great opportunity to upsell the robotic lawn mower installation.

https://www.youtube.com/watch?v=1vRt33eGoik

The post Robot ReDirect appeared first on AM-Robots.

This kit contains a heat shrink connector and a heat shrink tube, that together give the most secure underground connection of 2 boundary wires.

1^st layer is our blue heat shrink connector that has tin inside to give a secure and great conductivity throughout the installation.

2^nd is our black heat shrink tube, this layer is made from strong plastic and contains a high level of glue inside. This makes the connection extremely strong and long lasting.

• For underground connections
• Perfect conductivity
• High level of glue
• Easy to shrink
• Very strong connection

We recommend using our heat gun for this repair.

Available in packs of 10 pcs and 50 pcs.

The post Pro Heat Shrink Kit (double heat-shrink) appeared first on AM-Robots.

This tube contains a high content of adhesive sealant inside.

This heat shrink tube makes the connection extremely strong, and together with our heat shrink connector, it will make an extremely good conductivity throughout the installation.

You can also use the heat shrink tube around docking station connectors to make an even more secure connection.

• High content of adhesive sealant
• Easy to shrink
• 10cm in length
• Very strong connection

We recommend using our heat gun for this repair.

The post Heat Shrink Tube 1,1mm-6,4mm appeared first on AM-Robots.

AM ROBOTS is proud to present our repair kit for shortened wires.

There is normally a gap between the two ends of cable that needs repairing after the damaged cable is removed.  The gap can often be 5 to 10cm.

The repair kits offers a 10 cm prolonged single connector that can connect the wires together again, even though the 2 ends of the wires are not close to each other anymore.

To make it the strongest connection possible, it comes with a 2^nd layer protection, that makes the connection even more secure and stable for many years.

• Easy and simple repair
• Gives a better connection
• Saves time
• Professional repair for shortened wires
• Comes in packs of 10 pcs.

We recommend using our heat gun for this repair.

The post Heat Shrink Repair Kit – 10 cm appeared first on AM-Robots.

This connector is used to connect the boundary wire with the docking station and is a must-have for all installers.

Use the Docking Station Connector when attaching the boundary wire to the docking station. Place the end of the cable on the metal plate inside the connector and close it. Use pliers to apply pressure. When locked, place the pointy end of the connector in the docking station.

• Large bags with 100 pcs.
• Small box with 5 pcs.
• For conductors at 0,5 mm2 to 1 mm2

https://www.youtube.com/watch?v=tsWIpka-Rto

The post Docking Station Connector – Red appeared first on AM-Robots.

This Connector is used for many purposes but is mostly used for underground connection with the Boundary wire. The options for this blue connector are unlimited.

• The connector has a white body and a blue cap. It is used to provide an insulated connection for 2 to 3 wires
• Use this product with a mineral oil lubricant to create a tight seal that's resistant to moisture
• The insulated connector is designed to work with 22 to 14 AWG solid/stranded wires
• Corrosion resistance is provided by the tin plating of the element, which is constructed from high-quality brass for good conductivity
• Suitable for use in temperatures up to 221°F (105°C)

The post 314 Connector appeared first on AM-Robots.

This connector is used to connect the boundary wire to the docking station. It is a quick and easy solution, for a professional installation. 

Use the Docking Station Connector when attaching the boundary wire to the docking station. Place the end of the cable on the metal plate inside the connector and close it. Use pliers to apply pressure. When locked, place the pointy end of the connector in the docking station.

• Large bags with 100 Pcs
• Small box with 5 pcs
• For conductors with a size of 1mm2 to 1,5 mm2

https://youtu.be/7a3gS2IFX8E

The post Docking Station Connector – Blue appeared first on AM-Robots.